Von: Codemercs Sales Datum: 21. Juni 2004 15:58:02 MESZ Betreff: Codemercs Newsletter 3/2004 Grossziethen June 21st 2004 - Deutsche Fassung am Ende des Mails! This is the latest issue of our electronic newsletter. You receive this newsletter because you did subscribe to it. If you don't want to receive this newsletter please use the email account on which you received it to send an empty message to ################################################### New variants of JoyWarrior available, version V1.0.3.0 released JW20A8-8 and JW20A8-16 are new variants of the JoyWarrior family, they provide up to four analog axes with the support of an inexpensive external A/D converter. The chips are available immediately. JW24RC is a new variant that converts the teacher/student signal of a model remote control into joystick data. It supports RCs with up to 12 channels, five of which are used as joystick axes, the rest is converted to buttons. The chips are available immediately. JW24GP32 has been revised, it does now need fewer external components and is available in a DIL24 package in addition to the SOIC24 package. Existing PCB layouts can be used with the new chip variant by omitting some components that are no longer needed. The chips are available immediately. JW24A8-8 and JW24A8-16 have been revised, they do now tolerate unused axes without the need to connect resistors to these inputs. There is no impact to existing designs. The chips are available immediately. JW24MOD-A8-8 and JW24MOD-A8-16 are modules based on the JW24A8-8 or JW24A8-16. These modules come as assembled and tested PCBs with all parts necessary for a functioning joystick controller, only the USB cable and the electromechanical components need to be connected. The modules will be available by the end of July. JW20GP8, JW20A10-8, and JW20A10-16 have not been changed by the move to V1.0.3.0, they are functionally identical to the V1.0.2.1 revision. ################################################### Disclaimer Trademarks mentioned in this newsletter are the properties of their respective owners. This newsletter is for information purposes only, specifications may change without notice. ------------------------------------------------------------------------------------------- Dies ist die neueste Ausgabe unseres Newsletters. Sie erhalten diese Email weil Sie den Newsletter bestellt haben. Sollten Sie keine weiteren Newsletter mehr erhalten wollen, so schicken Sie bitte von dem Email Account auf dem Sie den Newsletter erhalten haben eine leere Nachricht an: ################################################### Neue Varianten des JoyWarrior, Version V1.0.3.0 verfŸgbar JW20A8-8 und JW20A8-16 sind neue Varianten der JoyWarrior Familie, sie bieten bis zu vier analoge Achsen mit einem einfachen externen A/D Wandler. Die Chips sind ab sofort verfŸgbar. JW24RC ist eine neue Variante, die das Lehrer/SchŸler-Signal einer Modellfernsteuerung in Joystickdaten umsetzt. Bis zu 12 KanŠle werden unterstŸtzt, von denen die ersten fŸnf als Joystickachsen verwendet und die restlichen in Tasten umgesetzt werden. Die Chips sind ab sofort verfŸgbar. JW24GP32 wurde Ÿberarbeitet, er benštigt jetzt weniger externe Bauteile und ist zusŠtzlich zum SOIC24 auch im DIL24 GehŠuse verfŸgbar. Bestehende Designs kšnnen weiter verwendet werden indem einige Bauteile bei der BestŸckung weggelassen werden. Die Chips sind ab sofort verfŸgbar. JW24A8-8 und JW24A8-16 wurden leicht Ÿberarbeitet, es ist jetzt mšglich die EingŠnge von unbenutzten Achsen unbeschaltet zu lassen. Bestehende Designs werden davon nicht beeinflusst. Die Chips sind ab sofort verfŸgbar. JW24MOD-A8-8 und JW24MOD-A8-16 sind Module basierend auf JW24A8-8 oder JW24A8-16. Die Module werden als bestŸckte und getestete Platinen mit allen notwendigen Bauteilen fŸr einen Joystickcontroller geliefert. Lediglich das USB Kabel, die Potentiometer und Taster mŸssen noch angeschlossen werden um einen kompletten Joystick zu bauen. Die Module sind ab Ende Juli lieferbar. JW20GP8, JW20A10-8 und JW20A10-16 sind durch die V1.0.3.0 nicht verŠndert worden, ihre Funktion ist identisch zu den Chips der V1.0.2.1. ################################################### Warenzeichen die in diesem Newsletter genannt werden sind Eigentum der jeweiligen Rechteinhaber. Dieser Newsletter dient ausschlie§lich der unverbindlichen Information. Technische Spezifikationen kšnnen jederzeit ohne Benachrichtigung geŠndert werden. -------------------------------------- Code Mercenaries Hard- und Software GmbH Friedhofsweg 15 15831 Grossziethen Germany Tel: x49-3379-2050920 Fax: x49-3379-2050930 HRB 16007 Potsdam GeschŠftsfŸhrer: Guido Kšrber, Christian Lucht