Standard Variants of MouseWarrior

MouseWarrior20 O
- Optically encoded mouse or trackball mechanism supported
- Up to 3 buttons
- USB, PS/2, ADB™, and serial interfaces
- Power control pin for encoder LEDs
- Package options: PDIP20 or SOIC20

MouseWarrior20 V
- VersaPoint™ sensor by Interlink Electronics supported
- Up to 4 buttons
- USB, PS/2, ADB™, and serial interfaces
- Package options: PDIP20 or SOIC20

MouseWarrior24 Wheel II
- Optically encoded mouse or trackball mechanism supported
- Optical scroll wheel or scrolling by two extra buttons.
- Up to 6 buttons (5 buttons via PS/2)
- USB and PS/2 interface
- PS/2 interface with type 3 and 4 protocols
- Internal pull up resistors for X, Y, Z axes can be disabled
- Replaces MouseWarrior Wheel
- Package options: PDIP24 or SOIC24

MouseWarrior24 Eye III
- Optical sensor for no moving parts (Agilent ADNS 2051)
- Optical scroll wheel or scrolling by two extra buttons.
- Up to 6 buttons (5 buttons via PS/2)
- USB and PS/2 interface
- PS/2 interface with type 3 and 4 protocols
- Internal pull up resistors for Z axis can be disabled
- Replaces MouseWarrior Eye II
- Package options: PDIP24 or SOIC24

MouseWarrior24 J8
- Three analog potentiometer axes with 8 bit resolution each
- Supports up to 6 buttons, direct connected to the chip
- USB interface
- Operates either as mouse or joystick, can be switched between modes at any time
- Auto calibration and auto centering (can be disabled)
- Minimal external circuit: 1R, 2C
- Package options: PDIP24 or SOIC24

MouseWarrior24 H8
- Three analog voltage inputs supporting a wide variety of sensors
- Works with hall sensors, potentiometers, and other sensors
- Supports up to 6 buttons, direct connected to the chip
- Operates either as mouse or joystick, can be switched between modes at any time
- Auto calibration, auto centering, and dynamic recentering (can be disabled)
- Low cost external A/D converter
- Package options: PDIP24 or SOIC24